3. Firmly screw the knob of the mounting bracket into the mounting hole.
4. Hold and screw the camera to the mounting bracket. Rotate the camera to
adjust the view and check it using the live stream, which you can access in the
eufy Security app.
For troubleshooting, check Help on the eufy Security app. Refer to the app page
for LED indicator status.
14 EN
SAFETY
- Do not use the device in the environment at a too high or too low temperature,
never expose the device to strong sunshine or too wet environment.
- The suitable temperature for T8030 and accessories is -10°C to 45°C .
- The suitable temperature for T8160 and accessories is -20°C to 50°C (Charging
temperature is 0°C to 45°C) .
- It is recommended to supply the device in an environment with a temperature
that ranges from 5°C~25°C.
- When supplying, please place the device in an environment that has a normal
room temperature and good ventilation.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Please ensure to use only the adapter offered by the manufacturer. Using
unauthorized adapter may cause danger and violate the authorization of the
device and the guarantee article.
- This adapter is for indoor use only. The adapter type (for S380 HomeBase) is
KA2401A-1202000DE, rated output voltage/current is 12 Vdc/2A. The plug is
considered as disconnect device of adapter.
Warning:
- Replacement of a battery with an incorrect type can defeat a safeguard;
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting
of a battery can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment
can result in an explosion or the leakage of flammable liquid or gas; and
- A battery subjected to extremely low air pressure may result in an explosion or
the leakage of flammable liquid or gas.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
EN 15