Oras Electra 6102 Guía De Instalación Y Mantenimiento página 13

Changing the pilot valve
(figures 4 and 5)
6107A, 6109A
– Switch off the mains current and close the water inlet to the faucet.
– Undo the spout's locking screw (19) and pull off the spout (18).
– Undo the cover plate's locking screws (17) with a 2 mm Allen key.
– Detach the sleeve (16) and cover plate (15).
– Detach connectors 10 & 11 from each other.
– Detach connectors 12 & 13 from each other.
– Undo the screws (21) and detach the solenoid valve.
– Undo the screws (22) and detach the pilot valve (25).
– Fasten the new pilot valve in place and reassemble in reverse order.
Changing the solenoid valve membrane
(figures 4 and 5)
6107A, 6109A
– Switch off the mains current and close the water inlet to the faucet.
– Undo the spout's locking screw (19) and pull off the spout (18).
– Undo the cover plate's locking screws (17) with a 2 mm Allen key.
– Detach the sleeve (16) and cover plate (15).
– Detach connectors 10 & 11 from each other.
– Detach connectors 12 & 13 from each other.
– Undo the screws (20) and lift off the membrane socket's (26) cover.
– Detach the solenoid valve membrane (27) and clean it or if necessary change for a new one.
– Reassemble in reverse order.
Cleaning/changing the litter filters
(figures 4 and 5)
6107A, 6109A
– Switch off the mains current and close the water inlet to the faucet.
– Undo the spout's locking screw (19) and pull off the spout (18).
– Undo the cover plate's locking screws (17) with a 2 mm Allen key.
– Detach the sleeve (16) and cover plate (15).
– Detach connectors 10 & 11 from each other.
– Detach connectors 12 & 13 from each other.
– Unscrew the litter filter (5).
– Clean the litter filter under running water or if necessary change for a new one.
– Reassemble in reverse order.
13