ROTOR INspider ROT117 Manual De Usuario página 42

3 .2. .a b. MANUAL PAIRING
If there is more than one ANT+™ power sensor close to you: once the power meter is active and
within two minutes of activation (as it enters sleep mode after two minutes), manually introduce
the INspider "SENSOR ID" into the ANT+ device.
The "SENSOR ID" can be found on the inner side of the spider power meter. This serial number
can also be found
3.b. BLUETOOTH® SMART PAIRING
Connect your ROTOR power meter with any Bluetooth® Smart compatible device.
Once INspider is active and within two minutes of activation (as it enters sleep mode after two
minutes of inactivity), push the "PAIR" button on your Bluetooth® Smart device at the "GENERAL
SETTINGS" screen. The "PAIR button is usually located in the SETTINGS menu:
Settings\General Settings Pair and sincro Pair other devices
Wait until you see the "SENSOR ID" in the screen's device and select it. Wait until it is paired.
You can connect your Inspider power meter to the ROTOR Power app via Bluetooth® Smart too.
The ROTOR Power app is iOS and Android compatible and can be downloaded for free in your
smartphone. Please check section 7.1 of this manual for more information about the app.
42 Pairing
on the first page of this manual.
\
TM
\
Sensor ID: 17878