Ac Connections - EcoFlow Smart Generator Dual Fuel Manual Del Usuario

2.4.3 AC Connections

1. Start the generator.
2. Insert the plug into the AC Output Socket and check that the on-screen AC output port icon is illuminated.
3. Switch on the electrical equipment.
Tips: When the generator is in operation, the AC output can be turned on and off through the AC output
switch. If the output reaches or exceeds 50% of the rated level of the generator, you can switch to high
performance mode by holding the AC output switch for two seconds or setting it in the app. If the
generator is powering multiple electrical equipments, then power the electrical equipment according to
their output level, from highest to lowest.
Switch off all electrical equipment before inserting plugs.
Warning
Caution
Make sure that all electrical equipment including wires and plugs are in good condition before being
connected to the generator, and confirm that all loads carried by the generator are within the rated load
range and that the load current is within the rated current range.
Tips: Make sure that the generator is grounded. If any electrical equipment needs to be grounded, the
generator must also be grounded.
12