Dc Charging; Charging The Delta Max, The Delta Pro, Or The Power Kits - EcoFlow Smart Generator Dual Fuel Manual Del Usuario

2.4.4 DC Charging

2.4.4.1 Charging the DELTA Max, the DELTA Pro,
or the Power Kits
1. a. To use Fuel: Turn the fuel cap vent valve knob
to ''ON'' (See 2.4.1 Step 1);
b. To use LPG: Connect the LPG cylinder to the
entire machine, and open the valve
(See 2.4.1 Step 1);
2. Turn the Engine Switch to "ON" (see Step 2 in
paragraph 2.4.1).
3. Connect with DELTA Max ①， DELTA Pro ②， or
Power Kits ③ through the 5m/ 16.4ft Extra Bat
tery Connection Cable*.
4. If the remaining power of DELTA Max,
DELTA Pro or Power Kits falls to the lower limit,
it will send a request to the generator to re
charge. The generator will respond and start
recharging.
Tips: If the remaining power of DELTA Max,
DELTA Pro or Power Kits does not fall to the lower
limit, the generator can be started by hand to start
recharging.
5. When the remaining power of DELTA Max,
DELTA Pro or Power Kits reaches the upper limit,
a request will be sent to the generator set to
stop charging, and the generator set will
respond and automatically stop.
Tips: When it is automatically started, the generator
AC output switch is off by default. When the AC is
on, the generator will not be available once the DC is
finished. The upper and lower power limits can be set in
the app of the portable power station being connected.
When charging DELTA Max, DELTA Pro, or Power Kits, it is recommended that the upper power limit be
set to 80% in order to increase fuel efficiency. Turn on the AC output switch for simultaneous AC output
when the DC output is already on. The total power of AC+DC is 1,800W (gasoline)/1,600 W (LPG), with
AC output prioritized.
*When connected the DELTA Pro for charging, you will need to purchase the DELTA Pro to Smart Generator
Adapter from the e-commerce store for connecting the generator to DELTA Pro or Power Kits.
①
Extra Battery
Connection Cable
②
DELTA Pro to
Smart Generator
Adapter
③
13