Introduction To The Icons On The Display Screen - EcoFlow Smart Generator Dual Fuel Manual Del Usuario

2.2 Introduction to the Icons on the Display Screen

Remaining Running Time
Low Temperature Alert
High-Temperature Alert
Remaining Oil Percentage: If the amount of oil falls below 600 ml while the gasoline is in use, the
remaining oil percentage will show as 0%. During this time, the icon will flicker to remind you to add
more fuel immediately. The display will show 99% when the LPG is in use.
Wi-Fi Status: The devices that support Bluetooth connection will be connected to the App directly or to
the Internet after the the network connection process is completed.If it is successfully connected to the
Internet, the icon will stay on.
Error Code: Please refer to the EcoFlow app for specific information on error codes.
ECO Mode: In this mode, the generator will automatically match the rpm according to power output
level in order to reduce fuel consumption and noise. Default ECO Mode.
ECO Mode Settings:
1. Hold the AC power switch for two seconds;
2. This can be done in the app. For details, please refer to 2.4.5.
* See Section 5 for more troubleshooting steps.
Remaining Power Percentage
ECO
Eco Mode
AC Output
Pairing Indicator
Wi-Fi Status
Total Run Time
Communication Connection
Output Overload Alert
DC Output
Output Power
Rechargeable
Battery Fault Alert
Error Code
Carbon Monoxide
Alert
5