Sauder Tremont Row 427968 Manual De Instrucciones página 27

Step 22
å
Fasten the WIDE EXTENSION SLIDES (4) to the LARGE DRAWER SIDES (M
and N). Use six 1/2" FLAT HEAD SCREWS (21).
å
NOTE: For each EXTENSION SLIDE, turn a SCREW into the 1
in the enlarged diagram. Then, turn a SCREW into each of the other two
holes that line up with the holes in the DRAWER SIDE.
å
Fasten one PULL (10) to the LARGE DRAWER FRONT (K). Use two 1-1/4"
MACHINE SCREWS (15).
4
427968
Open end
M
10
K
www.sauder.com/service
hole shown
st
1-1/4" MACHINE SCREW
(2 used for the PULL)
N
4
1
st
15
Open end
21
1/2" FLAT HEAD SCREW
(6 used for the SLIDES)
Page 27