FLAEM RF9 Manual De Instrucciones página 11

2. Place the valve (11.1b) with the flat side down onto the particle size regulator (11.1a) by
aligning the hole with the position ribs, then screw the selector (11.1c) onto the threaded
pin of the regulator all the way down. Rotate the assembled regulator to make sure that it
turns freely and that the selector moves up and down between positions.
11.1b
11.1a
3. Insert and press the previously assembled particle size regulator (11.1) all the way down,
keeping it in a horizontal position, in the upper part (11.2), and matching the partitions of
the selector (11.1c) with the groove in the upper part (11.2).
4. Insert the assembled upper part (11.1 + 11.2 + 11.13) into the lower part (11.4) and hook
it by turning it clockwise.
11.2
11.1c
b
11.1+11.2+11.3
a
11.4
9
11.1c
11.1a +
11.1b
11.1