5/Use; First Use - Selecline 154589 Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
10. Detach the door gasket, rotate 180 degrees and reattach it. See Figure 11.
5/ USE

FIRST USE

Cleaning the Interior
Before using the appliance for the first time, wash the interior and all internal
accessories with lukewarm water and a mild soap. Dry thoroughly. This will clear the
typical smell of a brand-new product.
IMPORTANT! Do not use detergents or abrasive cleaning materials as these will
damage the finish.
Temperature Setting
IMPORTANT! If the appliance has been moved, wait at least four hours for fluids
inside to balance before plugging it in and turning it on.
■ Plug in your appliance.
■ The internal temperature is controlled by a thermostat. There are three settings:
MIN, NORMAL and MAX (see Figure 12). MIN is the warmest temperature and
MAX is the coldest temperature setting.
■ The appliance may not operate at the correct temperature if it is in a particularly
hot location or if you open the door frequently.
■ When starting up your appliance after a period of time when it has not been
used, turn the settings up to MAX and wait approximately two hours before
filling the freezer with food. Then set the thermostat to the setting that suits
your current climate.
IMPORTANT! In the event of accidental defrosting, for example due to a power
failure, if the power has been off for longer than 7.5 hours, the defrosted food must
be eaten quickly, or if raw, cooked and then re-frozen (after cooling).
13

Publicidad

Tabla de contenido
loading

Tabla de contenido