Canon MF657Cdw Guia De Instalacion página 4

En
1
Fr
De
Connecting the Power Cord
5
It
Es
Ca
Eu
Pt
El
Da
Nl
Specifying the Basic
6
No
Settings
Sv
When you turn on the machine for the first time, the Setup
Fi
Guide appears on the operation panel. Perform the initial
machine setup by following the on-screen instructions.
Ru
Uk
Lv
Lt
Et
Pl
Cs
1.
Select the language, then the country/
Sk
region and finally the time zone.
Sl
2.
Set the current date/time.
Hr
Specifying the Security
Hu
7
Settings
Ro
Bg
Specify the basic security settings to prevent unauthorized
access to the machine.
Tr
1.
To use the Remote UI, select <Yes>.
Ar
Fa
5
2
1
Operation panel
6 7 8
• To continue without using the Remote UI, select
<No> and proceed to step
• When <A Remote UI Access PIN must be
configured...> appears, proceed to step 5.
2.
To use System Manager mode, select <Yes>.
• Set the System Manager ID and PIN so that you
can configure the settings for extended functions
and the management of access privileges, etc.
• To continue without using System Manager
mode, select <No> and proceed to step 5.
3.
Set the System Manager ID.
Enter any number and then select <Apply>.
4.
Set the System Manager PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
5.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
6.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
Using Color Correction
8
For better print results, the use of color correction is
recommended.
1.
Choose whether to use color correction.
2.
Check that the paper displayed on screen is
actually loaded and then select <OK>.
3.
Select <Start> and correct the colors by
following the on-screen instructions.
4
9 12
.
8
8
.