Health O Meter Professional 500KL Manual De Instrucciones página 139

POWERING THE SCALE
Powering the Scale – Inserting Batteries
1. With a Phillips head screwdriver remove the screw from the battery compartment cover
located on the back of the display. Remove the battery cover by pressing downward on
the locking tab.
Display assembly
2. Replace or install 6 new AA batteries. Health o meter
alkaline or lithium battery, rated for 130°F (54°C) operation. Do not use zinc-carbon
batteries.
3. Re-attach the battery cover to the display assembly.
4. Ensure all objects are removed from the scale's platform, and then press the
turn the scale on. The display will show a version number, followed by dashes, then "0.0".
LB (Pounds) is the default weight measuring unit upon initial set-up/assembly. Press the
UNIT button to select your desired weight mode (LB or KG). (500KL only)
Note: If "LoBat" appears on the display, it indicates that the battery power is low. It does NOT
indicate a problem with the weight measurement.
Warning: If the scale will not be used for some time, remove the batteries to avoid a
safety hazard. Disposal of batteries must be performed in accordance with the prevailing
national, regional or local regulations that apply to
Optional AC Adapter
1. Connect the AC adapter (not included) into the adapter jack on the scale platform C.
Warning: To avoid a safety hazard, use only a Health o meter
2. Plug the scale's AC adapter into the power source.
3. When the AC adapter is disconnected from the scale, the scale will switch to battery power if
batteries are installed.
Caution: Always plug the AC adapter into the scale first, then into the power source/wall outlet.
Power Source Icons
AC Icon: The AC icon will display when the scale is being powered by the AC adapter.
Battery Icon:
1. The battery icon will display when the scale is being powered by batteries.
2. The battery icon indicates the level of battery power remaining.
When all three segments are full, this indicates full battery power.
3. If the battery icon is empty, replace the batteries.
depleted the display will flash "LoBat" and the scale will power off.
P/N UM500KL 500KG Rev 20191120
Battery cover
®
Professional recommends using an
you.
®
Professional AC adapter.
If the batteries are completely
139
Back to Home Page
Locking tab
button to