Seat Adjustment - Ardea Mobility CN220 Manual De Instrucciones

1
2
(Fig. 3)
Illustrative image

11.4 Seat adjustment

(Fig. 4)
Illustrative image
ADJUSTMENT OF THE SEAT HEIGHT
(Fig. 5)
Illustrative images
The seat can be adjusted using the seat post height adjustment.
1. Fold up the backrest by pulling up the lever on the left-hand side of the seat, then stand
behind the scooter and, after pushing down the lever on the underside of the seat (right-hand
side), use both hands to lift the seat off the rod (Fig. 5);
2. Remove the bolt+nut from the seat rod, then adjust the seat to the desired height, reinsert
and tighten the bolt+nut (Fig. 6);
3. Reinsert the seat on the rod (Fig. 7).
TIPPING THE ARMRESTS
Raise the armrests to assist getting on and/or off the
scooter.
SLOPING THE ARMRESTS
Turn the adjustment knob in an anti-clockwise direction
to increase the slope of the armrests. Turn the
adjustment knob in a clockwise direction to reduce the
slope of the armrest
ADJUSTING THE ARMREST HEIGHT
Turn the knob in an anti-clockwise direction
point 2) , pull the knob outwards and move the armrest
vertically to increase or reduce the armrest height.
Release the knob and turn it in a clockwise direction
once you have chosen the desired height.
SEAT DEPTH LEVER
The depth of the seat can be adjusted. Pull the lever
(Fig. 4 - point 1)
1
position. Release the lever.
SEAT ROTATION LEVER
2
The seat can be rotated through 360 ° and locked at
every 45 °.
Press the lever down and rotate the seat to the desired
position (Fig. 4 - point 2). Release the lever to lock the
seat in position.
(Fig. 6)
(Fig. 3 - point 1).
and position the seat in the desired
(Fig. 7)
15
(Fig. 3 -