Water Connection; Recycling; Instructions For Use And Maintenance; Risks Of Use - Fagor SB-E910 Instrucciones De Instalación, Uso Y Mantenimiento

The manufacturer will not be held liable for any personal or material damage to the
machine resulting from incorrect installation or failure to comply with the manufacturer's
specifications.

4.5 Water connection

The general installation must have a stop-cock. The water inlets are defined in the "General
dimensions and connections" section with the letter A.
The recommended water pressure is between 2 and 4 bars and the maximum temperature is 60°C
The water inlets on the appliances are ¾".
The appliance is installed in accordance with the EN 1717 standard and national water regulations.

4.6 Recycling

The product packaging consists of:
•
A wooden pallet
•
Cardboard edge protectors.
•
A polypropylene band
•
A plastic bag.
All the packaging used around the machine can be recycled; The correct disposal of these products
will help to protect the environment. For further information regarding the recycling of these products,
please refer to the relevant office of the local government. Dispose of these materials in accordance
with current legislation.

5. INSTRUCTIONS FOR USE AND MAINTENANCE

BEFORE STARTING THE APPLIANCE, PLEASE READ THE INSTRUCTIONS
CONTAINED IN THIS MANUAL CAREFULLY.
THIS APPLIANCE IS EXCLUSIVELY FOR PROFESSIONAL USE, AND SHOULD
ONLY BE USED BY QUALIFIED PERSONNEL.

5.1 Risks of use

5.2 Operation

Instructions for the correct use of the appliance:
•
The tilting bratt pan is designed for preparing sauces and braising or stewing different foods.
•
Do not use the pan as a deep fryer. The temperature at the bottom of the pan reaches more
than 230 ºC and the oil may catch fire.
•
Do not use the iron-based pan to cook food with a high level of acidity.
•
Do not heat the pan with the cover closed.
•
Do not scratch the base of the stainless steel pan with spatulas or iron wire brushes.
The steps required to optimise the operation of your tilting bratt pan are shown below, with all the
available options.
tightly to the stuffing box.
You are using a tilting bratt pan, do not use this appliance for anything other
than what it is designed for, as its operating components may be damage.
Clean the machines thoroughly. If you are going to use solvents or inflammable
cleaning products to remove any dirt on the pan, always do so when the pan is
cold, the control buttons are switched to Off, and the mains power is
disconnected.
Once the products have been used, carefully rinse them with plenty of water
and then dry the pan.
There is a risk of trapping when lowering the tub or the cover. Proceed with
care.
Care should be taken when tilting the pan to empty the contents. The food may
be hot and there is a risk of burns.
20