Siemens euroset 2010 Instrucciones De Manejo página 6

19.04.2000 2010-
euroset 2010,IM1, A31008-E2010-B100-2-3S19
Mute
You can deactivate the telephone handset and microphone during a call.
Neither you nor the called party will hear each other. The connection is
L
maintained and is indicated by the playing of music on-hold.
Press the mute key during the call.
To reactivate the handset and microphone:
Press the key again.
Setting the handset volume
>"
There are 2 handset volume settings (factory setting: level 1).
 
Lift the handset, then start the function.
"<
1 = Soft,
or
2 = Loud.
Press the set key, then replace the handset.
Activating/ deactivating the key confirmation tone
A "confirmation tone" is activated as an acoustic check that the telephone
>"
has registered each individual key pressed. You can activate and deacti-
vate the confirmation tone as you require:
 
Lift the handset, then start the function.
"<
0 = Confirmation tone off,
or
1 = Confirmation tone on.
Press the set key, then replace the handset.
Locking/ unlocking the telephone
>"
Call numbers cannot be dialed when the telephone is locked, however in-
coming calls can be received.
 
Lift the handset, then start the function.
"<
1 = Lock,
or
0 = Unlock
Press the set key, then replace the handset.
Operation at private PABXs
Entering/deleting exchange codes
If you are using your telephone on a private PABX, you may need to store
>"/
one or more exchange codes. A dialing pause of 3 seconds is automatically
set when the exchange code is saved.
"<
Lift the handset then start the function.
(a) To d d elete all exchange codes:
J
Press the set key and replace the handset.
(b) To e e nter an exchange code:
/ J
Enter a one- to three-digit exchange code.
If you want to enter another exchange code:
"<
Press the redial key and enter the next exchange
code.
Press the set key, then replace the handset.
– 6 –
- English -