Important Safety Instructions - Bestway 58623 Manual Del Propietário

WE SUGGEST NOT TO RETURN
THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
bestwaycorp.com/support
OWNER'S MANUAL
Visit Bestway YouTube channel
IMPORTANT SAFETY
INSTRUCTIONS
When installing and using
this electrical equipment,
basic safety precautions
should always be followed,
including the following:
READ AND FOLLOW
ALL INSTRUCTIONS
WARNING
- This is not a TOY. Children should be
kept out of reach from this robot and its
accessories.
- Never allow children to operate this
product.
- This robot is not intended for use by
someone with reduced physical, sensory
or mental capabilities or a lack of
experience and knowledge unless they
have been given instructions concerning
the appliance and are under supervision
of the person responsible for their safety.
- Make sure the robot is fully immersed in
the water before operation. The minimum
water level required to operate the robot
must reach above the swivel head of the
robot. Operating the robot when it is not
immersed in the water correctly could
damage the unit and void the warranty
as a result.
- Maximum operating depth in water is 3
meters (10 ft.).
- Operating water temperature: 5°C (41°F)
- 35°C (95°F).
- Only use the detachable supply unit
(external adaptor) provided with this
robot to charge the battery.
- Detachable supply unit
(external adaptor).
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not
play with the appliance.
- Connect the external adaptor to a power
source through a residential current
device (RCD) / a ground fault circuit
interrupter (GFCI). If in doubt, consult a
qualified professional electrician.
- Do not use this robot if any damage is
detected.
- Replace damaged parts as soon as
possible. Only use parts certified by the
distributor or manufacturer.
- Turn off the robot, disconnect the
external adaptor from the power source,
and unplug the external adaptor from the
charging base, before detaching the
robot from the charging base.
- Disconnect the robot from the supply
mains and make sure the robot is power
OFF prior to servicing it such as cleaning
the filter and swivel smoothing-ring.
- The battery installed is a rechargeable
Li-ion battery pack. Never attempt to
replace it.
- The robot is only to be recharged with
external adaptor and charging base
delivered with this product.
- DO NOT handle the robot, external
3
EN