Lapierre sit and go! Manual De Utilización página 40

II— Settings
Test 1
For your safety, respect the torque
specifications of the different
components.
Check your bike before and after every
ride for play or vibrations, which will help
identify if a part is not tightened correctly
or needs replaced.
All manuals and user guides at all-guides.com
Test 2
2 Drivetrain
2 Rear derailleur
1
This is one of the most important component parts of your
bicycle. It must be properly adjusted in order to offer optimal
performance and to prolong its lifespan. If you have additional
questions that are not answered in the manual, please ask your
authorized Lapierre dealer for more information.
™
To minimize resistance and wear, the chainrings, chain and cogs
should all be as aligned as possible.
Normally, the procedures described in this manual should have
been completed before you receive your bike.
However, if at some point you do need to make adjustments,
please follow the steps below :
1 Loosen the cable anchor bolt so that the derailleur is free to move.
2 Adjust the inner and outer limits, as in the drawing (p 40).
3 Tighten the cable by pulling on it and secure it using the cable
anchor bolt. If necessary, you can further adjust with the barrel
adjuster located on the derailleur.
41
GB