Lapierre sit and go! Manual De Utilización página 46

III—Startandgo !
Power-assist bike
Startandgo !
Power-assist bike
Congratulations on your new electric bicycle purchase. Please read
this manual carefully. It contains information on the proper care of
your electric bicycle and advice on how to achieve the batteries full
lifespan. Please contact your local dealer for enquiries not covered
by this manual.
All manuals and user guides at all-guides.com
Use your bike
The battery needs to be installed into the rear rack of your bike to
connect with the input pins of the controller. Thus, the battery can
provide the power to the motor of your bike.
Step 1 Insert the battery into the rack.
Step 2 Follow the track in the rack.
Step 3 Lock the battery into place .
Step 4 Plug key into the keyhole of controller, and then switch
the key to On position.
 [a] [b] [c]
[a]
[c]
47
GB
[b]