Diamond DCS9 Manual De Instrucciones página 11

ASSEMBLY INSTRUCTIONS
CHAPTER 3 ASSEMBLING THE DRAINING PUMP
Assembling should be performed by skilled personnel
1
2
3
All manuals and user guides at all-guides.com
OPERATIONS:
1. Disconnect the power supply (through the wall
switch) before performing any operation
2. Remove the right side panel of the machine by
removing the two fastening screws "A" on the frame
in the lower side of the machine.
A
3. Lift the flask (at the bottom of the machine) and
fasten the motor pump using the special holes and
fastening screws.
P a g e 9