Diamond DCS9 Manual De Instrucciones página 4

P a g e 2
CHAPTER 1 ASSEMBLING THE DETERGENT DISPENSER
Assembling should be performed by skilled personnel
1
2
A
3
All manuals and user guides at all-guides.com
OPERATIONS:
1. Disconnect the power supply (through the wall
switch) before performing any operation.
2. Remove the machine front panel by removing
the two fastening screws "A" on the frame in the
lower side of the machine.
3. Insert the detergent inlet junction by removing
the rubber plug into the special hole in the tank,
on the left side.
ASSEMBLY INSTRUCTIONS