Pride Mobility FUSION e Manual Del Propietário página 18

Note:
Charger specification model: HP8204B;
Charger input specifications: 115/230VAC 60/50Hz 2.7/1.7A
Charger output specification: 24VDC/5A
The charger indicator has 3 states:
1) Green: Power is on;
2) Yellow: Charging;
3) Green: Battery is fully charged.
Please note that power chairs have a safe circuit to prevent the chair moving during
charging. If the power chair cannot be driven normally after charging, please check if the
battery charger is disconnected from the charging terminal and check if the connection
between the battery and the motor is loose. The charger must be kept at a temperature
between -25 ° C and 40 ° C in a dry environment and should not be subject to mechanical
damage. In all cases, the charger must be repaired by an authorized dealer.
Prohibited! Removal of grounding prong can create electrical hazard. If
necessary, properly install an approved 3-pronged adaptor to an electrical
outlet having 2-pronged plug access
Prohibited! Never use an extension cord to plug in your battery charger. Plug
the charger directly into a properly wired standard electrical outlet.
Prohibited! Do not allow unsupervised children to play near the travel scooter
while the batteries are charging. We recommend that you do not charge the
batteries while the travel scooter is occupied.
Mandatory! Read the battery charging instructions in this manual and in the
manual supplied with the battery charger before charging the batteries.
Warning! Explosive gases may be generated while charging the batteries. Keep
the travel scooter and battery charger away from sources of ignition such as
flames or sparks and provide adequate ventilation when charging the batteries
Warning! Inspect the battery charger, wiring, and connectors
before each use. Contact your authorized provider if damage is found.
Fusione
for damage
- 17 -