Glossary And Pictograms; Glossary; Pictograms; Guarantee - Wega Mininova 2GR EMA Manual De Uso Y Mantenimiento

Mininova

1.5 Glossary and Pictograms

This paragraph lists uncommon terms or terms whose
meanings are different than those most commonly used.
Abbreviations are explained below, as well as the meaning
of pictograms describing the operator's qualification and
the machine status; they are used to quickly and uniquely
provide the information needed to correctly and safely use
the machine.

Glossary

1.5.1
User
The person in charge of operating the machine and performing
the routine cleaning operations indicated in this manual.
Technician
A specialised person who has been specially trained and
authorised to carry out the following operations in accordance
with current regulations: transport and handling, storage,
installation, commissioning, maintenance, decommissioning,
dismantling and disposal of the machine.
Danger
A potential source of injury or damage to health.
Dangerous area
Any area in the vicinity of the machine where the presence of a
person constitutes a risk to the safety and health of that person.
Risk
Combination of the probability and severity of an injury or
damage to health that can arise in a hazardous situation.
Guard
Machine component used specifically to provide protection
by means of a physical barrier.
Personal protective equipment (PPE)
Clothing or equipment worn by someone to protect their
health or safety.
Intended use
The use of the machine in accordance with the information
provided in the instructions for use.
User qualification
Minimum level of skills an operator must have to carry out the
operation described.
Machine status
The machine status includes the mode of operation and the
condition of the machine's safety devices.
Residual risk
Risks that remain despite adopting the protective measures
integrated into the machine's design and despite the guards
and complementary protective measures that have been
adopted.
26 148
of
Safety component:
• Designed to perform a safety function.
• whose failure and/or malfunction endangers the safety
of persons.
1.5.2

Pictograms

Descriptions preceded by these symbols contain very important
information/requirements, particularly in regards to safety.
Failure to comply with these may result in:
• A safety risk for those operating the machine.
• User injury, including serious injury (in some cases
even death).
• The guarantee being rendered null and void.
• The Manufacturer waiving liability.
GENERAL DANGER symbol used when there is a
risk of permanent serious injury that would require
hospitalisation, or in extreme cases, even cause
death.
ELECTRICAL HAZARD symbol used when there is
a risk of permanent serious injury that would
require hospitalisation, or in extreme cases, even
cause death.
HIGH TEMPERATURE HAZARD symbol used when
there is a risk of permanent serious injury that
would require hospitalisation, or in extreme cases,
even cause death.
CAUTION symbol used when there is a risk of
minor injury that could require medical attention.
WARNING symbol used when there is a risk of
minor injury that could be treated with first-aid or
similar measures.
NOTE symbol
information about the topic.
Mandatory symbol indicating that safety gloves
must be worn; used when there is a risk of
permanent serious injury that would require
hospitalisation.
Mandatory symbol
documentation must be read; used to make the
user aware of the importance of this action for
their safety.

1.6 Guarantee

All of the machine's components are covered by a 12-month
guarantee, except for electrical and electronic components
and parts prone to wear and tear.
used to provide important
indicating that
User MANUAL
the