Lighting; Maintenance; Storage - Gesipa FireBird Pro S GE Manual De Instrucciones

1.6

Lighting

The blind rivet nut setting tool is equipped with a workplace light comprising 3 LEDs to illumi-
nate the work space; the light can be switched on by turning the black ring behind the LEDs.
There are 3 settings indicated by an arrow moulded into the housing:
1.7

Maintenance

Maintenance of the blind rivet nut setting tool is limited to the replacement of worn threaded
mandrels and nosepieces, as necessary (see section 2.1 for replacement of the threaded
mandrels).
Regular maintenance will extend the service life of your high-quality GESIPA
which should be serviced at least every 2 years by an authorised workshop or by
GESIPA Service. We recommend servicing of tools subject to intensive use at shorter
®
intervals.
1.8

Storage

Store the blind rivet nut setting tool in a dry place where there is no danger of frost.
— Continuous light/torch function:
The light is switched on after a riveting operation and stays on for approx.
10 minutes. The LEDs then turn off automatically.
•
Zero position::
Lights switched off.
-- Work light:
The light is switched on at the start of the riveting operation. The LEDs stay
on for about 10 seconds and then switch off automatically.
GB
tools
®
21