For Uk Use Only - WMF KUCHENminis 3200000126 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Descaling agent
Use a commercially available descaling agent that is suitable for filter coffee machines.
Do not use regular or concentrated vinegar because this can damage the materials in the appli-
ance.
Using descalers based on citric acid can lead to the formation of precipitates that seal the
limescale layer or clog up the lines in the appliance. Descaling with citric acid also takes too long, as a
result of which complete descaling cannot be guaranteed.
Our warranty does not cover damage caused by using unsuitable descaling agents or failing to
comply with the descaling instructions.
Handle descaling agents carefully to prevent damaging furniture or clothing.
Descaling
▪ Insert a paper filter in the filter (3), close the filter lid (2), and place the jug (6) in the machine. Any
larger pieces of limescale residue may collect on the filter paper, thus preventing the outlet valve
from clogging.
▪ Add descaling agent to the water tank (4) as per the manufacturer's instructions, fill with tap water
up to the 5-cup mark and switch the appliance on.
▪ After the descaling solution has passed through, empty the jug (6), switch off the device and allow
to cool for 5 minutes.
Important: To rinse the tank (4) after descaling, open the tank cover (1), fill the tank with fresh tap
water up to the 5-cup mark and start the brewing procedure. Then rinse the filter (3) and jug (6)
under running water.
Note: In the event of heavy calcification, repeat the descaling process.
14

For UK use only

▪ This product is supplied with a 13 A plug conforming to BS 1363 fitted to the
mains lead. If the plug is unsuitable for your socket outlets or needs to be
replaced, please note the following. If the plug is a non-rewireable one, cut
it from the mains lead and immediately dispose of it. Never insert it into a
socket outlet as there is a very great risk of an electric shock.
▪ The replacement of the plug at the mains lead has to be done according to the
following instructions:
Warning - This appliance must be earthed
Important: The wires in this mains lead are coloured in accordance with the
following code:
green/yellow
Earth
blue
Neutral
brown
Live
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
the wire which is coloured green and yellow must be connected to the
terminal which is marked with the letter E or by the earth symbol
coloured green or green and yellow,
the wire which is coloured blue must be connected to the terminal which
is marked the letter N or coloured black,
the wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
▪ If a 13 A (BS 1363) plug is used it must be fitted with a 13 A fuse conforming
to BS 1362 and be ASTA approved. If any other type of plug is used, the
appliance must be protected by a 10 A fuse either in the plug or adapter or at
the distribution board.
If in doubt - consult a qualified electrician.
▪ Never use the plug without closing the fuse cover.
The appliance complies with European directives 2014/35/EC, 2014/30/EC and
2009/125/EC.
At the end of its life, this product must not be disposed of in normal household
waste but must instead be delivered to a collection point for recycling electric
and electronic appliances.
The materials are recyclable in accordance with their labelling. The reuse,
recycling and or other use of old appliances makes an important contribution to
protecting our environment.
Please ask your local administration for the appropriate disposal point.
Subject to alterations
, or
15

Publicidad

Tabla de contenido
loading

Tabla de contenido