Inglesina otutto pram Manual De Instrucciones página 29

EN
28
COMPONENTS
1
A) FRAME
B)
C) STRING LOCK PLUG
D)
FRAME
WHEEL ASSEMBLING
2 Press the button E and hook rear
wheels until hearing a CLICK
insert the string F in the proper seat
3
on the frame
insert the string lock plug
4
WARNING: The correct
assembling of the joint brake is
important for the safe use of the
frame.
In case of problems during plastic
5
plug assembling, remove it as
the procedure.
6 Hook front wheels until hearing a
CLICK
CAUTION: Make sure that wheels
are correctly hooked before use
OPENING
Gripping the frame by the handles, lift
7
the lever G.
Pulling the handle towards the user,
8
the frame opens automatically.
Complete the opening by pushing with
9
the foot on the rear footboard until
hearing a CLICK.
10 Make sure that all closure
mechanisms are properly locked on
both sides before use.
FOLDING
Press button H and lift the handle
11
Pulling the handle upwards the frame
12
closes automatically
13 Be sure the lever G is properly linked
to the central joint
BRAKES
Operate both levers I with the foot
14
SWIVEL WHEELS
Operate both levers L with the foot
15
STEP-SKIPPING KIT
Operate the rear footboard with the
16
foot to skip small obstacles
OBJECT HOLDER BASKET
Insert the basket buttonhole on the
17
INSTRUCTIONS
support and fasten all the press studs
CAUTION: Maximum allowed load:
3 kg
CARRYCOT
FITTING THE CARRYCOT TO THE
FRAME
18
system: Correctly position the
carrycot on the frame until hearing a
CLICK.
CAUTION: Make sure that the
before use
RELEASING THE CARRYCOT FROM
THE FRAME
Act on the lever M positioned
19
externally on the feet side and
simultaneously lift the carrycot by
holding it from the handle.
FITTING THE HOOD
Hook the press studs on the carrycot
20
structure
21
fastening it using the suitable press
studs
HANDLE AND HOOD ADJUSTMENT
To adjust the handle and the
22
hood act on the two lateral button
simultaneously.
The hood is equipped with a net that
23
always allows your baby's view.
FITTING THE COVER
Fasten all the cover press studs to the
24
carrycot
INTERNAL VENTILATION
It is possible to adjust internal
25
ventilation by using the lever N
REMOVING THE LINING
26 It is possible to remove the lining as
BACKREST ADJUSTMENT
Operate the lever O to adjust the
27
backrest: once the desired position is
reached, set the lever to the starting
position.