Inglesina otutto pram Manual De Instrucciones página 30

SEAT UNIT
FITTING THE SEAT UNIT TO THE
FRAME
28
system: position the seat unit on the
frame until hearing a CLICK.
CAUTION: Make sure that the
before use
SEAT UNIT FACING THE MUM OR
THE STREET
29 It is possible to use the seat unit
facing the mum or the street, and fold
30
RELEASING THE SEAT UNIT FROM
THE FRAME
31 Press both handles P simultaneously
and lift up the seat unit from the
frame
seat unit from the frame with the
baby inside
BACKREST ADJUSTMENT
It is possible to adjust the backrest to
32
many positions: push the lever Q to
lower the backrest
FOOTREST ADJUSTMENT
Operate levers R to adjust the footrest
33
height
SAFETY HARNESS
Hook the waist straps to the central
34
buckle
35 Hook the shoulder straps to the rings
S
Adjust the harness with the baby
36
inside
CAUTION: Always use the safety
harness
BUMPER BAR ADJUSTMENT
Press the buttons T and adjust the
37
bumper bar to the desired position
its correct hooking
FITTING THE HOOD
38
openings and fasten all press studs to
the backrest
The hood is equipped with a net that
39
always allows your baby's view
REMOVING THE LINING
INSTRUCTIONS
It is possible to fully remove the lining
to wash it. Remove the waist strap,
take off the crotch strap and the
shoulder straps
Unfasten all press studs.
40
lining after washing correctly
HUGGY
FITTING THE HUGGY SEAT TO THE
FRAME
41
position the seat on the frame until
correct hooking.
CAUTION: Make sure that the
before use
RELEASING THE SEAT FROM THE
FRAME
Press lever V
42
Lift up the seat from the frame
43
SEAT FACING THE MUM OR THE
STREET
44
to the frame facing the mum or the
street.
EN
29