Sea-Bird Scientific SBE 37 MicroCAT Manual Del Usuario Básico página 6

2.4 Communications
Memory
Communication interface
RS485 output rate
Data collection rate
Data storage
C, T, time
C, T, P, and time
2.5 Analytical
Parameter
Conductivity 0–70 mS/cm
Temperature -5–45 °C
Pressure not more than the
SBE 37 rated depth
Section 3 Antifouling devices
AF24173 anti-fouling devices contain bis(tributyltin) oxide. Wear rubber or latex gloves and eye protection to
replace these devices on the sensor if it is so equipped. Wash hands with soap and water when finished.
Read the precautions on the product label.
It is a violation of US federal law to use this product in a manner that is inconsistent with its label.
3.1 Verify anti-fouling devices
New sensors have two anti-fouling devices and a yellow protective label installed by the
manufacturer.
Make sure to remove the label before the sensor is deployed or pressurized or the conductivity cell can be
damaged.
1. Remove the yellow label.
• The user can make sure the anti-fouling devices are installed: refer to "Remove or replace anti-
fouling devices" for details.
2. Keep the label to attach again to protect the intake and exhaust ports when the sensor is not
deployed.
3.2 Remove or replace anti-fouling devices
Remove the anti-fouling devices as a first maintenance task to save the anti-fouling material for
deployments.
1. Use a 5/32 inch hex wrench to loosen the two captured cap screws that attach the copper anti-
fouling assembly to the plastic assembly on the pressure housing. Carefully remove the copper
anti-fouling assembly from the housing.
6 English
8 Mb
RS485
user-selectable, 600–115200 baud (default 19200)
1 Hz
800000 samples
533000 samples
Range Accuracy
±0.003 mS/cm
±0.002 °C (-5–35 °C) 0.0002 °C/mo
±0.1% full scale
range
N O T I C E
Stability
0.003 mS/cm/mo
0.05% full scale range/yr
C A U T I O N
Resolution
0.0001 mS/cm
0.0001 °C
0.002% full scale
range