TOPDON BT200 Manual Del Usuario página 11

3. Charging Test (12V&24V)
3.1 Before Test
The engine must be ON during test in order to have
results. Ensure all electrical accessories and devices
remain in the OFF state.
* Turning ON/OFF any electrical accessories in the
vehicle during the test will affect the accuracy of the test
result.
3.2 Steps
1) The RED (+) Positive Battery Clamp is connected
to the (+) positive battery terminal, and the BLACK
(-) Negative Battery Clamp is connected to the (-)
negative battery terminal. Ensure that the clamps
have a firm, secure grip on the battery terminals for
accurate results.
For 12V Battery
CRANKING TEST
CRANKING V NORMAL
CRANKING TIME
1599ms
10.33 V
For 24V Battery
CRANKING TEST
CRANKING V NORMAL
CRANKING TIME
2400ms
22.54 V
EN I 11