TECHNICAL DATA / SCOPE OF DELIVERY / INSERTING THE BATTERY
Technical data
Input voltage:
Transmission frequency:
Working current:
Quiescent current:
Stand-by consumption:
Transmitting power:
Protection class:
Permissible ambient
temperature:
Range:
Channels:
Compatibility:
* Range data are approximate values and depend on the structural conditions.
Scope of delivery
1.
Handheld transmitter incl.
battery
2.
Wall mount incl. Mounting
material
Instruction manual
This product contains a button cell battery. If swallowed, the button cell battery
can cause severe internal burns and death in as little as 2 hours.
Keep new and used batteries away from children. If the battery compartment can-
not be closed securely, stop using the product and keep it away from children. If
you think batteries may have been swallowed or may have entered any part of your
body, seek medical attention immediately.
Inserting the battery / changing the battery
The battery is (depending on the transmitter model) enclosed loose or already installed and secured against discharge with a
protective foil. Open the rear cover, remove the protective film and insert the battery into the battery compartment with the +
(plus) side facing up.
Then close the battery compartment again.
Use a tool (e.g. sim card pin, mini screwdriver, fine needle) to press the fuse button and slide the battery cover
down.
18
3V battery (type 2430)
433,05 - 434,79 MHz
≤ 15 mA
≤ 15 μA
≤ 45 μW
≤ 10 mW
IP 20
+10°C to +50°C
Open field: approx. 150m* / indoors: approx. 30m*.
5 channel
JULIUS MAYER Radio Drives & Receivers
1
Handheld transmitter JMHST-5
Depending on the frequency of switching
operations, we recommend replacing the battery at
least every 2 years.
2
Wall mount incl.
Mounting material