JULIUS MAYER JMHST-5 Manual De Instrucciones página 22

PROGRAMMING
Jog mode Enable/Disable
1. Power is ON (motor is connected and ready for operation).
2. Press P2 programming key 1 x. Motor beeps 1 x.
3. Press UP key 1 x. Motor beeps 1 x.
4. Press P2 programming key 1 x. Motor beeps 3 x*.
OK! Jog mode activated/deactivated.
*The frequency of the beeps or the reaction of the motor / shutter depends on the receiver.
Please refer to the corresponding instructions of the respective receiver / motor.
Activating and deactivating the timer function – JMHST-5
By pressing and holding the K1 key, you can switch between the individual modes.
1. Manual mode - no timer function:
Automatic OFF.
2. Automatic mode - timer function in UP and DOWN:
Shutters open and close automatically at previously programmed times.
Automatic mode - timer function in UP and DOWN with random function:
Shutters open and close automatically at previously programmed times.
However, the set opening and closing times are shifted randomly in the range from 0 to 15 minutes*.
*Time period cannot be influenced - is controlled arbitrarily by the electronics!
22