JULIUS MAYER JMHST-5 Manual De Instrucciones página 24

PROGRAMMING
Setting the current time and date
Each keystroke must be executed within 4 seconds!
Otherwise, the system automatically exits the programming mode.
Switch to manual mode. (see p. 23)
1. Press and hold the K2 key. After approx. 5 seconds, the current hour of the time flashes.
2. Release the key.
3. Use the UP and DOWN keys to set the current hour.
4. After setting the hour, briefly press the K2 key.
The minute display flashes.
5. Use the UP and DOWN keys to set the current minute.
6. After setting the minute, briefly press the K2 key again.
The display of the current day (Mo-Tu-We-Th-Fr-Sa-Su) flashes.
7. Use the UP and DOWN keys to set the current day of the week.
8. To confirm the set values (weekday/time), then press the K1 key for approx. 5 seconds.
The hour and minute displays flash simultaneously.
9. Finally, briefly press the K2 key - the colon between the hour and minute displays flashes.
The programming of the time and the day of the week is completed, the settings are saved.
24