Sony SLS-1A Manual De Instrucciones página 31

Connection and Installation
Connecting with Devices
System Configuration and Setup Flow
The following three approaches are available for audio setup. Choose one of the approaches in accordance with the
size of installation facility or the devices to connect for installation.
Approach 1: Using the Line-Array Speaker Manager application for setup with performing a sound simulation in
advance
Approach 2: Using the Line-Array Speaker Manager application for setup without performing a sound simulation
Approach 3: Using the DIP switch for setup
Approach 1: Using the Line-Array Speaker Manager application for setup with performing a sound
simulation in advance
The following shows a connection example in a large facility and the speakers are located on the top, bottom, left and
right of the large screen display.
Connect the speakers with Dante compatible audio devices using Ethernet cables. Via a network switch (  ), connect
the speakers to a digital signal processor (  ) that has, among others, a power amplifier (  ), a subwoofer (  ), and a
video player (  ) connected.


Configuration
1
Perform a sound simulation with EASE Focus 3 and FIRmaker 3D.
• EASE Focus 3 and FIRmaker 3D can be downloaded from the website of AFMG Technologies GmbH at:
https://www.afmg.eu/en
• EASE Focus 3 data for the speaker can be downloaded from the website at:
https://pro.sony/products/professional-speakers/SLS-1A
2
Join the speakers together (page 11).
3
Connect audio devices to the speakers, and then the speakers to AC outlets with the power cords.
4
Mount the speakers on a wall (page 17).
5
Connect a computer to one of the speakers using an Ethernet cable and make setup of the speaker,
such as speaker placement, with the Line-Array Speaker Manager application (page 15).



7
GB