Publicidad
Idiomas disponibles
Idiomas disponibles
For vertical installation
Shoulder screws: Secure each to the location
indicated by "V" ( ).
Spacer pads: Adhere the square ones to the two
locations at the top and bottom ends of the wall
mounting bracket and the rectangle one to the
location at the top end.
5
Hook the speaker bracket over the shoulder
screws that are fastened to the wall
mounting bracket.
Place the speaker so that its side with the bass
reflex vents comes closer to the display or screen.
18
GB
6
Attach the detachment stopper to either
end of the wall mounting bracket.
Align the detachment stopper with the speaker
bracket using the dowels and dowel holes on
them as reference points for positioning ( ), and
then secure them together a 4×10 screw with
washer.
Tightening torque: 2.0 N·m
7
Secure the safety wire to the wall.
Note
• Use screws (commercially available) adequate to the
wall material and strength. Depending on the wall
material, use of an inadequate screw may damage the
wall.
• Secure the speaker horizontally or vertically on a
re-enforced wall.
• Request your dealer or a construction company to do
secure mounting work with thorough consideration for
safety.
• Sony assumes no liability for any accident or damage
arising from improper mounting, insufficient mounting
strength, improper use, natural disasters, etc.
Publicidad
