Insignia NS-27HTV Guia Del Usuario página 7

VIDEO OUT
CABLE
AIR
HDMI
VIDEO
DIGITAL AUDIO
AUDIO
OUTPUT
S-VIDEO
Using component video
Connect a DVD player or other equipment's
YPbPr, YCbCr jacks, or HDMI jack to the YPbPr,
YCbCr jacks, or HDMI jack of the television. For
more information, see the following diagram.
AUDIO
L
R
HDMI
Using your television
Using the remote control
Use the remote control by pointing it towards the
remote control sensor on the television. Objects
between the remote control and the remote
control sensor may prevent proper operation.
The remote control may not work properly if the
remote control sensor on the television is under
direct sunlight or strong lighting. In such cases,
change the angle of the lighting or the television,
or operate the remote control closer to the
remote control sensor.
6
Back of DVD
S-VIDEO
L R
AUDIO OUT
AVI
AV2
Y
L
Pb/Cb
R
Pr/Cr
INPUT
OUTPUT
Back of DVD
Pb/Cb
Pr/Cr
VIDEO
AUDIO
www.insignia-products.com
Turning the television on and off
Turn on the television by pressing the POWER
button on the television or on the remote control.
The power indicator turns red when the
television is in Standby mode.
Using Standby mode
The television switches to Standby mode
automatically if there is no signal for five
minutes. To turn the television on, press the
POWER button on the remote control.
Changing channels
Change channels by using the CH
button on the television or on the remote control.
Using these buttons scans through the channels
in memory. You can also press the number
buttons on the remote control to select a
channel.
Turning the volume up or down
Use the VOL or
on the remote control to adjust the volume.
Muting the volume
Press the MUTE button once to turn off the
sound. Press it again to restore the sound or
press the VOL or
sound.
Selecting an input source
Press the INPUT button to select the source to
be displayed on the television from the
equipment you have connected to the AV jacks:
Air TV, Cable TV, AV-1, AV-2, AV-3, S-Video,
YPbPr, or HDMI.
Selecting an aspect ratio
ZOOM
Press the button to cycle through and
select AUTO, 16:9, 4:3, or ZOOM.
Using the sleep feature
Press the SLEEP button on the remote control
to select OFF, 15, 30, 60, 90, or 120 minutes.
The television automatically turns off when the
time has elapsed.
To cancel the sleep function, press the SLEEP
button repeatedly until the display changes to
OFF.
Paging up a list or menu
Press the PAGE UP button to turn to the
previous page.
Paging down a list or menu
Press the PAGE DOWN button to turn to the next
page.
Choosing a program
1 Press the LIST ALL button to list all channels
in the television memory.
2 Press or to move the cursor in the
channel list.
3 Press the ENTER button to choose the
channel.
Choosing a program from your favorite channels
1 Press the FAVORITE button to list your
favorite channels. To create your favorites list,
see "Using the Channel menu" on page 8.
2 Press the or
channel list.
3 Press the ENTER button to choose the
channel.
NS-27HTV 27-inch Color TV
or
button on the television or
button to restore the
to move the cursor in the