EGO ST1610E-T Manual De Instrucciones página 12

CAUTION:
EN Obstructions in the vents will prevent
the air from flowing into the motor housing and result in
overheating or damaged of the motor.
CLEANING THE UNIT
◾
Clean the unit using a damp cloth with a mild detergent.
Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
◾
Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils, such as pine and lemon, and by solvents
such as kerosene. Moisture can also cause a shock
hazard. Wipe off any moisture with a soft, dry cloth.
◾
Use a small brush or the air discharge of a small
vacuum cleaner brush to clean the air vents on the rear
housing.
◾
Keep the air vents free of obstructions.
SHARPENING THE LINE-CUTTING BLADE
WARNING: Always protect your hands by wearing
heavy gloves when performing any maintenance on
the line-cutting blade.
1. Loosen the two screws and remove the line-cutting
blade from the guard (Fig. O).
O-1 Screws
2. Secure the blade in a vise.
3. Carefully file the cutting edges of the blade with a
fine-tooth file or sharpening stone, being careful to
maintain the original cutting-edge angle.
4. Replace the blade onto the guard and secure it in
place with the two screws.
STORING THE UNIT
◾
Remove the battery pack from the trimmer.
◾
Clean the tool thoroughly before storing.
◾
Store the unit in a dry, well-ventilated area, locked-up
or up high, out of the reach of the children. Do not store
the unit on or adjacent to fertilizers, gasoline, or other
chemicals.
12
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1610E-T
O-2 Line-cutting blade
Protecting the environment
Do not dispose of electrical equipment,
used battery and charger into household
waste! Take this product to an authorized
recycler and make it available for
separate collection. Electric tools must be
returned to an environmentally
compatible recycling facility.