Publicidad
Idiomas disponibles
Idiomas disponibles
SC 35 • Operating Manual
Optional: Basic blade - 400123 (250x80x1.5 mm 9.8x3.1x0.06")
• Strip floor coverings
• Lift carpet tiles and foam backed carpets
• Cork tiles and matting
Optional: Long blade - 400238 (200x130x1.5 mm / 7.9x5.1x0.1")
• Strip floor coverings
• Lift carpet tiles and foam backed carpets
• Cork tiles and matting
Optional: U-blade - 400213 (270x80x1.5 mm / 10.6x3.1x0.1")
• Remove felt, underlay
• Linoleum and vinyl flooring
• Matting
Optional: Chisel set - 400253 (Chisel holder, Chisel: 25x280 mm / 0.98x11", Chisel: 50x300 mm /1.98x11.8")
• Tiles
• Parquet
• Hard debris
Mounting the blades
The original package includes 1 pce of hex key 5 mm, 1 pce of basic blade and 2 pcs blade
adapters.
Find the blade, the key and the adapters in the package.
1. Tip the machine and secure the tipped machine from tilting over.
2. Place the blade into the blade holder and secure it with the screws by using the hex key
provided.
3. Mount the blade in neutral position without the adapters. (Fig. 1).
4. Use the adapters to set the blade into high (Fig. 2) or low (Fig. 3) positions.
Fig� 1
10
Fig� 2
Fig� 3
Tools
Publicidad
