Publicidad
Idiomas disponibles
Idiomas disponibles
Jandy
TruChlor Erosion Feeder
®
Section 7. Troubleshooting
SYMPTOM
Glass lid is
cloudy
Reduced Flow
/ Low Chlorine
/ Flow Indicator
Not Moving
Leaks around
connections
Low chlorine
concentration in
the pool
Water is green
and/or algae is
present
|
Installation & Operation Manual
CAUSE
Chlorine exposure
Clogged valve
assembly
Clogged chlorinator
body
Damaged o-rings
1. The trichlor
tabs have been
consumed
2. Filtration time too
low
3. Chlorine demand
too high
A water parameter
is not properly
maintained (pH,
cyanuric acid, etc)
ENGLISH
CORRECTIVE ACTION
Remove the lid and wipe clean. If it
remains cloudy, it will clear itself if left
exposed to sunlight and fresh air. DO
NOT leave chlorinator open without
the lid installed. If the lid must be left
off to clear up, a replacement must be
installed temporarily
Remove the replaceable valve
assembly. It can be detached to clean
any build-up or debris.
The bottom grate can be removed
when chlorine is gummed up inside
the unit. The chlorine residue must
be dislodged or it may affect feeder
performance. The grate helps keep
pieces of the tablets from clogging the
outlet.
Check o-rings for damage, replace as
needed.
1. Add trichlor tablets in the unit.
2. Increase filtration daily time.
3. If using 3" tabs, use 1" instead.
Contact your pool professional for
more details and actions
Page 13
Publicidad
