Publicidad
Idiomas disponibles
Idiomas disponibles
Page 4
Section 2. Product Information
Before you begin installation, verify you have all necessary parts
(See Tables 1 or 2 below, depending on model).
IN-LINE MODELS
KIT PART NO.
1
R0966800
2
R0966900
3,4
R0966500
5
R0966600
6
R0449000
7
R0967600
8,9
R0967000
Table 1. In-Line Model Components
Figure 1.
In-Line Components
*The TruChlor In-line VS feeder comes with the Low Flow Inlet, Cone and Outlet pre-
installed. These are for systems with 2-speed or variable speed pumps where system flow
is below 50 gpm at the low speed. If the system uses only a single speed pump, or the
low speed is over 50 gpm, remove the inserts. Installations with Variable Speed pumps
must be done using the Variable Speed Insert Kit. Minimum operating flow is 20 gpm.
ENGLISH
COMPONENT DESCRIPTION
Cover
O-ring (Cover)
Grate and Check Valve Assembly
Replaceable Valve and Flow Indicator
Universal Union Assembly (Includes 2 Unions)
Drain Plug Kit
Variable Speed Insert Kit* - 3pcs (VS version only)
Jandy
TruChlor Erosion Feeder
®
|
Installation & Operation Manual
QTY
1
1
1
1
1
1
1
Publicidad
