Canyon CNE-KW41WP Guía Rápida página 5

EN
GENERAL INFO
The Canyon Cindy KW-41 device is a smart watch for children with a large set of
functions, which works autonomously and supports a SIM card.
Article: CNE-KW41WP (white/pink), CNE-KW41BL (blue/light blue); CNE-KW41YB
(yellow/black).
DEVICE DESCRIPTION
WARNING! The device is not intended for children under 4 years old.
Functions: two-way calls; incoming SMS; emergency call (3 first numbers in the phone
book); phone book (up to 15 numbers); support 4G; silent mode; built-in music player;
USB mode for transferring music files from/to PC; camera; photo album; calculator;
pedometer; stopwatch; alarm; 7 games.
Specifications: DC 5.0 V / 1.0 A; IP67; 192 MB RAM; 128 MB ROM. ASR3603S,
832 MHz. Screen: 1.6 inches, IPS, touchscreen, 240×280 pixels. Network: 2G, 4G,
GSM 850/900/1800/1900 MHz; GSM 900: 33 dBm, GSM 1800: 30 dBm; LTE:
B 1/2/3/5/7/8/20. Camera: 0.3 MP. Built-in TF card: 512 MB, non-removable. Slot for
nano-SIM. Case: plastic; 53.3×42.3×14.5 mm. Strap: silicone, 20×230 mm. Weight:
42 g. Battery: lithium polymer, 3.7 V, 680 mAh, non-removable. Full charge time: 3.5 h.
Operation time: in active mode up to 2 days; in standby mode up to 5 days. Operating
conditions: temperature 0–40 °C, humidity 0–80 %.
Accessories: smart watch Cindy KW-41, charging cable Pogo pin (4 pin) with USB
Type-A (length 50 cm), the SIM card ejection tool, quick start guide.
EXTERIOR VIEW (figures A, B, C). 1. Button 1. 2. Button 2. 3. Camera. 4. Speaker.
5. Screen. 6. SIM card tray. 7. Microphone. 8. Electrical contacts for charging and data
transfer. 9. Charging cable.
PREPARATION FOR OPERATION
Charging (figure C). Charge the device before using it for the first time. To do this,
connect the charging cable (9) to the electrical contacts (8) as shown in figure C and
connect it to the power supply. A full charge is displayed on the watch screen as an
icon .
WARNING! The power supply output should not exceed 5.0 V 1.0 A (power adapter not
included).
Inserting a SIM card (figure D, E). The device must be turned off while the card is
being installed. Before installation, make sure that the nano-SIM card is activated and
4G data transfer is connected. Use the SIM ejection tool to remove the SIM card tray (6),
and insert the card as shown in figure D. Then carefully insert the tray into the watch.
On/Off. To turn the device on or off, press and hold button 2 for two seconds.
Note. Date and time are automatically set by your mobile carrier. Turn the watch on with
a SIM card inserted and wait for synchronization.
Change of watch faces. For more information on selecting a watch face, see the full
user manual at canyon.eu/drivers-and-manuals.
Quick menu. While on the screen watch face, swipe down to go to the quick menu.
Here you can find information about the level of the GSM and 4G signal, battery level,
information about the time, date and day of the week, controls for screen brightness and
sound volume, as well as access to the device settings. To return to the main screen
watch face, press the button 2.
OPERATION
Outgoing calls. On the main watch face, swipe to the left or right, select "Dialing a
number" (figure F-1), and enter the desired phone number. Or go to "Contacts" (figure
F-2) and select the desired contact. Then press the "Call" button to make a call. To
cancel the call, press button 2.
Incoming calls. When a call comes in, press "Accept" to answer or "Reject" to reject
the call.
5