Hilti NURON C 6-22 Manual De Instrucciones página 7

▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Charger
Generation
Serial no.
2 Safety
2.1 General safety instructions
WARNING Study all safety instructions and other instructions, im-
ages and technical data with which this power tool is provided. Failure
to observe the instructions below can result in electric shock, fire and/or se-
rious injury.
Keep all safety instructions and instructions for future reference.
▶ Persons (including children) with reduced physical, sensory or mental
abilities or lack of experience and knowledge are not permitted to use
this product.
▶ Do not allow children to play with the product.
▶ Install the charger in such a way that a battery inserted into it cannot fall
out.
2.2 Battery charger use and care
▶ To avoid injury, use the charger only to charge Hilti Li-ion batteries
approved for use with this charger.
▶ The location at which the charger is used should be clean, cool, dry and
protected from frost.
▶ The charger must be able to emit heat while in operation. The air vents
must therefore remain unobstructed. Do not operate the charger inside
a closed container.
▶ Maintain the product carefully. Make sure that no parts are broken or
damaged in such a way that the product no longer functions correctly. If
parts are damaged or broken, have the product repaired prior to further
use.
▶ Use chargers and the corresponding batteries in accordance with these
instructions and as is specified for this particular model. Use of chargers
for applications different from those intended could result in hazardous
situations.
▶ Recharge the batteries only with the chargers specified by the manufac-
turer. A charger that is suitable for a certain type of battery may present
a risk of fire when used with other types of battery.
*2275225*
C 6­22 | C 8­22
01
2275225 English 3