Operation; Before Initial Use - Dometic CF Serie Instrucciones De Uso

CoolFreeze
7

Operation

7.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 21).
The handles are enclosed unassembled. If you wish to attach the handles, proceed
as follows:
➤ Make a handle by putting two holders (fig. 4 1, page 4) and a handle (fig. 4 2,
page 4) together.
➤ Fasten the grip with the enclosed screws in the holes provided.
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit. This is how
to do it:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 2 4, page 3) twice.
➤ Use the "UP +" (fig. 2 6, page 3) and "DOWN -" (fig. 2 7, page 3) buttons to
select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
Reversing the lid opening direction
The lid hinges can be moved to the opposite side if you want to open the lid from the
opposite direction. To do this, proceed as follows:
➤ Open the latches.
➤ Remove the screws from the latches and take off the latches (fig. 5 1, page 4).
➤ Remove the screws from the hinges and take off the lid (fig. 5 2, page 4).
➤ Re-fit the hinges in the new positions.
➤ Re-fit the latches in the new positions.
EN
Operation
13