Publicidad
Idiomas disponibles
Idiomas disponibles
3. Technical data
Li-ion battery capacity
Battery voltage
Charging time (battery)
Idle speed
Cutter blade mounting hole
Cutter blade diameter
Blade thickness
Groove depth adjustment
Emission level
Vibration level
Weight
a
c
b
We reserve the right to make technical changes.
WARNING NOTE:
The noise and vibration values have been determined in accordance with EN 62841 and can be used for the
comparison of power tools. The measured values shown apply to new devices.
The values are suitable for a preliminary assessment of the vibration load (noise emission and vibration values).
The values represent the main applications of the power tool.
In daily use, noise and vibration values change, depending on the way the power tool is used, especially in
relation to the type of workpiece that is being machined. However, if the power tool is used for other applications,
with deviating insert tools or insufficient maintenance, the noise emission and vibration levels may vary. This can
significantly increase the vibration load over the entire working period. For an accurate estimate of the vibration
load, due account should also be taken of the times when the device is switched off or running, but is not in use.
This can significantly reduce the vibration load over the entire working period. Define additional safety measures
to protect the operators from the effects of vibrations, e. g.: maintenance of power tools and application tools,
keeping hands warm, organization of work processes.
28
Ah
V
min
rpm
mm
mm
mm
mm
L
(dB)
pA
(dB)
L
WA
A
(m/s
)
2
h
kg
lbs
a) mm / inch
b) mm / inch
c) mm / inch
5.0
18.0
max. 45
5,000
20
130
2.6
0–6, infinitely variable
81.3 (K = 3 dB)
92.3 (K = 3 dB)
<2.5 (K = 1.5 m/s
)
2
5.5 (including battery)
12.2
445/17.5
212/8.4
336/13.2
Publicidad
