AENO EK1S Manual Del Usuario página 8

Note: To interrupt the boiling, heating or holding temperature process press
the "Start/Stop" button (7) again or remove the kettle from the stand (3). The
indicator and backlight turn off.
A description of the kettle's contour light modes is available in the Installation
and Operation manual at aeno.com/documents.
WARNING! If you turn on the kettle without water it will turn off automatically.
Wait for the kettle to cool down before filling and turning it on again, otherwise it
will be blocked by the safety mechanism.
Connecting a device in the AENO mobile application
WARNING! Make sure your smartphone is connected to a 2.4 GHz Wi-Fi
network.
 Fill the kettle with water. Close the lid (6) tightly. Place the kettle on the
stand (3). Plug the power cord plug (9) into a power outlet.
 Launch the AENO application and log in to your account. Or download the
mobile application from Google Play or the App Store and register by
creating a new account.
 On the main application screen tap "+" or "Add device". In the window that
opens, select the "Kettle" category.
Note: When system requests appear to enable any functions on your
smartphone, follow the recommendations indicated in them.
 Enter your Wi-Fi network name and password if they are not filled in
automatically and click "Next".
 Make sure that "EZ" mode is selected in the upper right corner of the
"Connection instructions" screen.
 Press and hold the "Start/Stop" button (7) until a beep sounds and the
"40 °C" indicator flashes.
 In the application on the "Connection instructions" screen check the "The
indicator is blinking" box.
 Wait until the message "Device successfully added" appears.
 Make sure that the "40 °C" indicator has stopped flashing.
8 aeno.com/documents