Publicidad
Idiomas disponibles
Idiomas disponibles
If the connection fails, make sure the device is connected to a power source
and turned on and check the Wi-Fi router settings at https://aeno.com/router-
help. Remove the kettle from the stand, put it back on and then repeat the
connection process.
Note: The device can also be controlled via voice assistants. Detailed
information is available in the Installation and Operation manual at
aeno.com/documents.
Maintenance and descaling
WARNING! Before cleaning unplug the kettle by removing the power cord plug
from the socket and allow it to cool down.
Wipe the outside of the kettle with a soft cloth soaked in warm water or a weak
soap solution. Then wipe with a soft cloth soaked in clean water and wipe dry.
Do not use harsh detergents, abrasive pastes, polishes or detergents
containing acids or solvents.
Frequency of descaling: once a month (hard and very hard water) or once every
2–3 months (water of medium hardness or soft), when using the kettle 3–
5 times a day.
Limescale remedies and cleaning methods
Table vinegar
Pour 0.5 l of vinegar (6 %
or 9 %) into the kettle,
leave for 1 hour without
boiling. Pour out the
contents, wash the kettle
by drawing and draining
the water 5–6 times
Troubleshooting
The device does not turn on. Possible causes: there is no voltage from the
power socket; the kettle is not properly placed on the stand. Solution: check
aeno.com/documents
Citric acid
Boil 0.5 l of water. Add
25 g of citric acid and
leave for 15 min. Pour
out the contents, wash
the kettle by drawing
and draining the water
5–6 times
Descaler
Follow the
manufacturer's
instructions on the
product package
9
Publicidad
