PNI SafeHome PT03 WiFi Manual De Usuario página 6

3. In the main application interface,
click Add device or + in the upper right
corner.
4. From the list of devices, select
Sensors → Sensor (Wi-Fi)
5. Select the WiFi network and enter
the network password.
6. In the next interface, check the
option Confirm the indicator is blinking
rapidly.
7. Wait for the sensor to connect.
8. After your detector was identified,
tap Done to finish.
9. In the list of devices added to Tuya,
4 - User manual PNI SafeHome PT03