Publicidad
Idiomas disponibles
Idiomas disponibles
BOILER ASSEMBLY
1.
Remove the Boiler from its packing and make sure all packaging has been
removed (including the protective bags). Put the station on a flat and solid
surface.
2.
Unscrew the Safety Cap (1). Fill the boiler with a maximum of 8 cups (1.9
litres) of water for the 5100CJ. Use the funnel supplied, making sure you
do not overfill the tank (you can also use the water stick to determine the
water level in the steam tank).
Note:
To preserve the life of your boiler, we recommend distilled water.
Tap water is okay, but more cleaning is required. See maintenance section
for more cleaning information.
How to use the water stick:
your finger on the end of the water stick. While holding the end, remove the
water stick from the boiler tank. The water level capacity will then appear
on the stick measurement to indicate the level.
Fully insert the water stick into the tank. Place
8
Publicidad
