Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE THE BOILER
1.
Insert the plug into the electrical outlet. It is not recommended to use an
extension cord with your boiler. Using an extension cord can reduce the life
of your unit. If required, do not use more than 6' and ensure it is a 14-gauge
wire.
2.
Turn the boiler on by pressing the Boiler Button to the ON position (II).
When the boiler is on, the main power will illuminate.
3.
The boiler will begin to heat. Once the boiler reaches 3.5 BAR (50 PSI), the
steam ready light will illuminate.
4.
To activate the steam, press the steam button. Press the Foot Pedal to
release the steam.
NOTE:
While steaming, the steam ready light normally turns on and off,
indicating the heating element is activated and the unit is building
pressure back up. The boiler is safe to use at this time but you may see
some small water droplets. For optimal steam, always use when steam
light is illuminated.
St
Ste e a a m m
NOTE:
When you activate steam for the first time after
turning the boiler on, you may notice a fast decrease in
pressure. This is normal during the first time use.
9
Publicidad
