Starting / Stopping the
Engine
Starting the Engine
Observe safety precautions.
N
1
Press the manual fuel pump
N
bulb (1) at least five times – even if
the bulb is already filled with fuel.
Adjusting the setting lever
BG 86, SH 86 only
To start, move the setting lever to
N
the run position F
BG 56, BG 56 C, BG 66, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
3
The setting lever (2) allows the throttle
trigger (3) to be locked in the full throttle
position during operation.
Adjusting the choke knob
If the engine is cold
Set the choke knob to g
N
If the engine is warm
Set the choke knob to <
N
Also use this setting if the engine has
been running but is still cold.
Cranking
Place the machine on the ground so
N
that it is secure.
Make sure you have a firm footing:
N
Hold the machine firmly with your
right hand on the housing and press
down.
Hold the starter grip with your left
N
hand.
Version with Easy2Start
Pull the starter grip steadily.
N
Version without Easy2Start
Pull the starter grip slowly until you
N
feel it engage and then give it a brisk
strong pull.
NOTICE
Do not pull out the starter rope all the
way – it might otherwise break.
English
19