Health O Meter 499KL Manual Del Usuario página 128

ASSEMBLY INSTRUCTIONS (CONTINUED)
3. Locate the load cell connector cable
inside column A. While holding
column B, slide the cable through the
center opening at the top of column
B. Push the cable all the way through
Column B until the plug reaches the
bottom of the column.
4. Align column A and column B.
Notches are located at the bottom of
column A and the top of column B.
Snap the locking tab into place.
Ensure that the locking tab is locked
securely into place. Note: When
aligning and locking the columns,
use caution not to pinch the load
celLconnect or cable.
UM499KL 20191120
Column B
(top)
Column B
(top)
Load cell
connector
cable
Column B
(top)
Notches
128
Back to Home Page
Column B
Locking
Tab
Locked
position
Column A
(bottom)
Load cell
connector
cable
(bottom)
Column A
(bottom)