Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 17 Monday, February 20, 2023 2:02 PM
Control Panel
Control Panel Features for the Washer
Power On/Off Button
a
• Press this button to turn the washer on or off.
• Pressing this button during a cycle will cancel that cycle and any load settings will be lost.
• The door will unlock after a brief pause.
NOTE
• If there is any water remaining in the drum after the washer shuts off, it will drain after a delay. The
washer can be restarted at any time before the drain begins. However, once the water begins to drain,
all functions will be suspended until the water has been completely drained and the washer shuts off.
WASH/DRY Button
b
• Press this button to switch the center display between the washer and the dryer.
Status Display
c
• The current cycle and settings are shown in the display.
• Estimated time remaining and status messages are shown after the cycle is started.
SETTINGS Button
d
• This button allows you to select additional cycle options.
Start/Pause Button
e
• Press and hold this button to start the selected cycle.
• If the washer is running, use this button to pause the cycle without losing the current settings.
NOTE
• If the Start/Pause button is not pressed to start the selected cycle, after a delay the washer
automatically turns off and all cycle settings are lost. Any water remaining in the drum will be drained.
Cycles
f
• Either swipe over the cycle name to scroll through and select a cycle, or touch the down arrow next to
the cycle name to open the list of cycles.
• Once the desired cycle has been selected, the standard presets will appear in the display. These
settings can be adjusted using the Cycle Modifier buttons at any time before starting the cycle.
Cycle Modifier Buttons
g
OPERATION-WASHER
17
Publicidad
