Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 39 Monday, February 20, 2023 2:02 PM
Cycle Modifiers
About Modifier Buttons
Each cycle has default settings that are selected
automatically. Customize these settings using the
cycle modifier buttons.
Temp.
Use this button to select the temperature setting.
This allows precise care of fabrics and garments.
Press the Temp. button to select available settings.
Dry Level
Use this button to select the dryness level for the
cycle. Press the Dry Level button to select
available settings.
• The appliance will automatically adjust the cycle
time according to the selected dryness level.
Selecting More or Very will increase the cycle
time, while Less or Damp will decrease the cycle
time.
• Use a Less or Damp setting for items that you
wish to iron.
Dry Time
Use this button to manually select the drying time,
from 10 to 100 minutes, in 10-minute increments.
• Use this for small loads or to remove wrinkles.
Options and Extra Fuctions
Your dryer includes several additional cycle
options to customize cycles to meet your individual
needs.
Select the desired option after selecting the
desired cycle and settings.
NOTE
• The selected options can be found on SETTINGS
.
O
• To protect your garments, not every option is
available with every cycle.
OPERATION-DRYER
Dryer Settings
1
Press the SETTINGS button.
2
Scroll through to select the desired settings
and adjust them as needed.
• Swipe to turn some settings on or off.
• For other settings, press to bring up a
screen with available options.
NOTE
• If no action is taken for several minutes after
pressing the SETTINGS button, the display
reverts to the previous screen.
• You can see Washer and Dryer Common
Settings in Washer Settings.
Basic Options
TM
TurboSteam
TM
Adding the TurboSteam
helps reduce wrinkles and odor in fabrics.
WARNING
• Do not touch the door during steam cycles. The
door surface can become very hot.
• Do not attempt to reach into the dryer during a
steam cycle. Steam can cause severe burns.
NOTE
• Steam may not be clearly visible during steam
cycles. This is normal.
• Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
• When the filter/duct is clogged, this option may
not have optimal results.
• When the steam function is operating, the drum
will stop to allow steam to stay in the drum.
Damp Dry Signal
When this option is selected, the appliance signals
when the load is approximately 80% dry. This
39
option to a dry cycle
Publicidad
